Role of benzophenone-3 additive in the effect of polyethylene microplastics on Daphnia magna population dynamics.

The adverse effects of microplastics (MPs) on Daphnia magna have been extensively studied; however, their population-level effects are relatively unknown. This study investigated the effect of polyethylene MP fragments (33.90 ± 17.44 µm) and benzophenone-3 (BP-3), which is a widely used plastic additive (2.91 ± 0.02% w/w), on D. magna population dynamics in a 34-day microcosm experiment. In the growth phase, neither MP nor MP/BP-3 fragments changed the population size of D. magna compared with the control. However, MP/BP-3 fragments significantly reduced (p < 0.05) the population biomass compared to that of the control, whereas MP fragments did not induce a significant reduction. The MP/BP-3 group had a significantly higher (p < 0.05) neonate proportion than that in the control and MP groups. MP/BP-3 fragments upregulated usp and downregulated ecrb, ftz-f1, and hr3, altering gene expression in the ecdysone signaling pathway linked to D. magna growth and development. These findings suggested that BP-3 in MP/BP-3 fragments may disrupt neonatal growth, thereby decreasing population biomass. In the decline phase, MP fragments significantly decreased (p < 0.05) the population size and biomass of D. magna compared with the control and MP/BP-3 fragments. This study highlights the importance of plastic additives in the population-level ecotoxicity of MPs.

Effects of biodegradable P3HB on the specific growth rate, root length and chlorophyll content of duckweed, Lemna minor.

The extensive production and use of plastics have led to widespread pollution of the environment. As a result, biodegradable polymers (BDPs) are receiving a great deal of attention because they are expected to degrade entirely in the environment. Therefore, in this work, we tested the effect of two fractions (particles <63 µm and particles from 63 to 125 µm) of biodegradable poly-3-hydroxybutyrate (P3HB) at different concentrations on the specific growth rate, root length, and photosynthetic pigment content of the freshwater plant Lemna minor. Microparticles with similar properties made of polyethylene terephthalate (PET) were also tested for comparison. No adverse effects on the studied parameters were observed for either size fraction; the only effect was the root elongation with increasing P3HB concentration. PET caused statistically significant root elongation only in the highest concentration, but the effect was not as extensive as for P3HB. The development of a biofilm on P3HB particles was observed during the experiment, and the nutrient sorption experiment showed that the sorption capacity of P3HB was greater than PET's. Therefore, depleting the nutrients from the solution could force the plant to increase the root surface area by their elongation. The results suggest that biodegradable microplastics may cause secondary nutrient problems in the aquatic environment due to their biodegradability.

Insights into the shape-dependent effects of polyethylene microplastics on interactions with organisms, environmental aging, and adsorption properties.

The shape-dependent effects of microplastics have been studied in the context of ingestion but have not been considered in other environmental processes. Therefore, we investigated how the shape of polyethylene microplastics (spheres, fragments, and films) affects interactions with plants, aging, and their adsorption properties. The shape had no effect on the growth rate and chlorophyll content of duckweed Lemna minor, but the fragments strongly adhered to the plant biomass and reduced the root length. The adsorption process of the model organic compound (methylene blue dye) was described by the same kinetic model for all shapes-the experimental data best fit the pseudo-second order model. However, twice as much methylene blue was adsorbed on films as on fragments and spheres. During environmental aging, most biofilm developed on films. The biofilm on spheres contained significantly less photosynthetic microorganisms, but twice as much extracellular polymeric substances (EPS) as on fragments and films. This suggests that the attachment of microorganisms to spherical particles is limited and therefore more intensive production of EPS is required for stable biofilm formation. From the results of this study, it is evident that the shape of microplastics significantly affects not only ecotoxicity but also other environmentally relevant processes.

Phytoremediation: A promising approach to remove microplastics from the aquatic environment.

Due to the increasing amount of microplastics (MPs) in the environment, various technologies for their removal have been investigated. One of the possible technologies are phytoremediation methods, but insufficient understanding of the interactions between MPs and aquatic macrophytes limits their further development. In this context, the aim of this study was to investigate the interactions between polyethylene MPs and the floating aquatic macrophyte Lemna minor in terms of the extent and time frame of MPs adhesion to the plant biomass, the stability of the interactions under water movement and understanding the nature of the adsorption process through the adsorption isotherm models. The results showed that the maximum number of adhered MPs was reached after 24 h. With increased amount of plant biomass the number of adhered MPs increased as well. Slow movement of water had no statistically significant effect on the adhesion of MPs. Among several adsorption models, the Freundlich adsorption isotherm model was the best fit to the experimental data, which assumes weak binding of MPs to plant biomass. Finally, 79% of MPs was removed during 15 cycles of phytoremediation (i.e., the biomass was removed and replaced with new biomass 15 times) and it was calculated that 53 cycles would be needed to remove all MPs from the water phase under test conditions.

The bioadhesion and effects of microplastics and natural particles on growth, cell viability, physiology, and elemental content of an aquatic macrophyte Elodea canadensis.

Microplastics in the aquatic environment can interact with aquatic plants, but the consequences of these interactions are poorly understood. Therefore, the aim of this study was to investigate the effects of microplastics commonly found in the environment, namely polyethylene (PE) fragments, polyacrylonitrile (PAN) fibres, tire wear (TW) particles under a relevant environmental concentration (5000 particles/L) on the growth, cell viability, physiology, and elemental content of the aquatic macrophyte Elodea canadensis. The effects of microplastics were compared to those of natural wood particles. The results showed that all types of microplastics adhered to plant tissues, but the effect on leaves (leaf damage area) was greatest at PE > PAN > TW, while the effect of natural particles was comparable to that of the control. None of the microplastics studied affected plant growth, lipid, carbohydrate, or protein content. Electron transport system activity was significantly higher in plants exposed to PAN fibres and PE fragments, but also when exposed to natural particles, while chlorophyll a content was negatively affected only by PE fragments and TW particles. Elemental analysis of plant tissue showed that in some cases PAN fibres and TW particles caused increased metal content. The results of this study indicated that aquatic macrophytes may respond differently to exposure to microplastics than to natural particles, likely through the combined effects of mechanical damage and chemical stress.

A study of the adsorption of titanium dioxide and zinc oxide nanoparticles on polyethylene microplastics and their desorption in aquatic media.

In this study, we investigated the interactions between titanium dioxide (nTiO2) and zinc oxide (nZnO) nanoparticles and polyethylene microplastics (MPs) with respect to their adsorption and subsequent desorption in aquatic media. Adsorption kinetic models revealed rapid adsorption of nZnO compared to nTiO2, while nTiO2 was adsorbed to a greater extent - four times more nTiO2 (67%) was adsorbed on MPs than nZnO (16%). The low adsorption of nZnO can be explained by the partial dissolution of zinc from nZnO in the form of Zn(II) and/or Zn(II) aqua-hydroxo complexes (e.g. [Zn(OH)]+, [Zn(OH)3]-, [Zn(OH)4]2-), which were not adsorbed on MPs. Adsorption isotherm models indicated that the adsorption process is controlled by physisorption for both nTiO2 and nZnO. The desorption of nTiO2 was low (up to 27%) and not pH dependent, and only nanoparticles were desorbed from the MPs surface. On the other hand, the desorption of nZnO was pH dependent; at a slightly acidic pH (pH = 6), 89% of the adsorbed zinc was desorbed from the MPs surface and the majority were in the form of nanoparticles; at a slightly alkaline pH (pH = 8.3), 72% of the zinc was desorbed, but the majority were in the soluble form of Zn(II) and/or Zn(II) aqua-hydroxo complexes. These results demonstrated the complexity and variability of interactions between MPs and metal engineered nanoparticles and contribute to a better understanding of their fate in the aquatic environment.

Interactions between titanium dioxide nanoparticles and polyethylene microplastics: Adsorption kinetics, photocatalytic properties, and ecotoxicity.

The present study investigated the adsorption mechanism of titanium dioxide nanoparticles (nTiO2) on polyethylene microplastics (MPs) and the resulting photocatalytic properties. This effort was supported by ecotoxicological assessments of MPs with adsorbed nTiO2 on the immobility and behaviour of Daphnia magna in presence and absence of UV irradiation. The results showed that nTiO2 were rapidly adsorbed on the surface of MPs (72% of nTiO2 in 9 h). The experimental data fit well with the pseudo-second order kinetic model. Both suspended nTiO2 and nTiO2 immobilized on MPs exhibited comparable photocatalytic properties, with the latter showing a lower effect on Daphnia mobility. A likely explanation is that the suspended nTiO2 acted as a homogeneous catalyst under UV irradiation and generated hydroxyl radicals throughout the test vessel, whereas the nTiO2 adsorbed on MPs acted as a heterogeneous catalyst and generated hydroxyl radicals only locally and thus near the air-water interface. Consequently, Daphnia, which were hiding at the bottom of the test vessel, actively avoided exposure to hydroxyl radicals. These results suggest that the presence of MPs can modulate the phototoxicity of nTiO2 - at least the location at which it is active - under the studied conditions.

Beyond ingestion: Adhesion of microplastics to aquatic organisms.

The interactions of microplastics with aquatic organisms have been studied primarily using animal species, with dietary ingestion being the most important uptake route. However, recent research indicated that microplastics also interact with biota via bioadhesion. This process has been studied in aquatic macrophytes under laboratory conditions where microplastics adhered to their biomass, but monitoring studies also confirmed that microplastic bioadhesion occurs in other species and in the natural environment. Similarly, microplastics adhere to microorganisms, and in the aquatic environment they can be retained by ubiquitous biofilms. This can occur on a natural substrate such as sediment or rocks, but biofilms are also responsible for enhanced bioadhesion of microplastics to other biotic surfaces such as plant surfaces. Adhesion to these large biotic surfaces could influence the abundance and bioavailability of microplastics in the environment. Only few studies have been conducted on the bioadhesion of microplastics to animals, but their results confirmed that bioadhesion may be even greater than particle ingestion by some animals, such as corals or bivalves. However, the ecotoxicological effects are not yet fully understood and the possible transport of microplastics, e.g. adhered to fish or aquatic insects, also needs to be considered. In summary, bioadhesion seems to be an important process for the interactions of microplastics and biota. Neglecting bioadhesion in an environmental context may limit our understanding of the behavior, fate, and effects of microplastics in the aquatic environment.

Monitoring of biofilm development and physico-chemical changes of floating microplastics at the air-water interface.

Microplastics in the aquatic environment serve as a habitat for microbial life, on which they can form biofilms. However, how the development of the biofilm alters the properties of floating microplastics that are at the air-water interface and, therefore, not fully submerged, is not well understood. In this context, an aging experiment was conducted to monitor biofilm formation and changes in physico-chemical properties of low-density polyethylene (floating) microplastics over time. The growth of the biofilm followed the typical bacterial/biofilm growth phases and reached about 30% of the total mass of the microplastics, while the concentration of extracellular polymeric substances within the biofilm remained stable. Presence of chlorophyll a and urease activity indicated presence of photosynthetic microrganisms within the biofilm which was also confirmed by analysis of the biofilm composition. Chemical characterization by FTIR showed the formation of additional functional groups attributed to the formed biofilm, and SEM imaging showed cracks on the surface of the aged microplastics, indicating incipient degradation of the polyethylene. Moreover, the adsorption capacity of the aged particles for metals (Pb(II)) was 52% higher compared to the pristine ones. Aging increased the density and size of the particles; however, it did not lead to the submersion of the aged particles even after 12 weeks of aging, suggesting that additional environmental processes may influence the transport of microplastics from the air-water interface into the water body.

Laser-based techniques: Novel tools for the identification and characterization of aged microplastics with developed biofilm.

Microplastics found in the environment are often covered with a biofilm, which makes their analysis difficult. Therefore, the biofilm is usually removed before analysis, which may affect the microplastic particles or lead to their loss during the procedure. In this work, we used laser-based analytical techniques and evaluated their performance in detecting, characterizing, and classifying pristine and aged microplastics with a developed biofilm. Five types of microplastics from different polymers were selected (polyamide, polyethylene, polyethylene terephthalate, polypropylene, and polyvinyl chloride) and aged under controlled conditions in freshwater and wastewater. The development of biofilm and the changes in the properties of the microplastic were evaluated. The pristine and aged microplastics were characterized by standard methods (e.g., optical and scanning electron microscopy, and Raman spectroscopy), and then laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) were used. The results show that LIBS could identify different types of plastics regardless of the ageing and major biotic elements of the biofilm layer. LA-ICP-MS showed a high sensitivity to metals, which can be used as markers for various plastics. In addition, LA-ICP-MS can be employed in studies to monitor the adsorption and desorption (leaching) of metals during the ageing of microplastics. The use of these laser-based analytical techniques was found to be beneficial in the study of environmentally relevant microplastics.

The Response of Duckweed Lemna minor to Microplastics and Its Potential Use as a Bioindicator of Microplastic Pollution.

Biomonitoring has become an indispensable tool for detecting various environmental pollutants, but microplastics have been greatly neglected in this context. They are currently monitored using multistep physico-chemical methods that are time-consuming and expensive, making the search for new monitoring options of great interest. In this context, the aim of this study was to investigate the possibility of using an aquatic macrophyte as a bioindicator of microplastic pollution in freshwaters. Therefore, the effects and adhesion of three types of microplastics (polyethylene microbeads, tire wear particles, and polyethylene terephthalate fibers) and two types of natural particles (wood dust and cellulose particles) to duckweed Lemna minor were investigated. The results showed that fibers and natural particles had no effect on the specific growth rate, chlorophyll a content, and root length of duckweed, while a significant reduction in the latter was observed when duckweed was exposed to microbeads and tire wear particles. The percentage of adhered particles was ten times higher for polyethylene microbeads than for other microplastics and natural particles, suggesting that the adhesion of polyethylene microbeads to duckweed is specific. Because the majority of microplastics in freshwaters are made of polyethylene, the use of duckweed for their biomonitoring could provide important information on microplastic pollution in freshwaters.

The first plastic produced, but the latest studied in microplastics research: The assessment of leaching, ecotoxicity and bioadhesion of Bakelite microplastics.

Bakelite, the first synthetic plastic, is a rather unexplored material in the field of ecotoxicology, despite its long production and use. The aim of this study was to investigate the ecotoxicity of Bakelite microplastics (before and after leaching) and its leachates on four aquatic organisms: the crustacean Daphnia magna, the plant Lemna minor, the bacterium Allivibrio fischeri and the alga Pseudokirchneriella subcapitata. Bakelite microplastics before and after leaching and leachates affected all organisms, but to varying degrees. Leachates showed increased ecotoxicity to Daphnia magna, while Pseudokirchneriella subcapitata was more affected by particles. For Lemna minor and Allivibrio fischeri, the effects of particles before leaching and leachate were comparable, while the negative effect of particles after leaching was minimal or not present. All leachates were analysed, and phenol and phenol-like compounds were the predominant organics found. In addition, bioadhesion of Bakelite microplastics to the surface of Daphnia magna and Lemna minor was confirmed, but the particles were mainly weakly adhered. Results of this study suggest that, in addition to the recently studied microplastics from consumer products (e.g. from polyethylene and polystyrene), microplastics from industrial plastics such as Bakelite may be of increasing concern, primarily due to leaching of toxic chemicals.

Long-term interactions between microplastics and floating macrophyte Lemna minor: The potential for phytoremediation of microplastics in the aquatic environment.

The presence of microplastics (MPs) in the environment has raised many concerns, and therefore approaches and technologies to remove them in situ are of high interest. In this context, we investigated the interactions between polyethylene MPs (fragments with a mean size of 149 ± 75 µm) and an aquatic floating macrophyte Lemna minor in order to assess its potential use for in situ phytoremediation. We first investigated the long-term effects of a high (100 mg/L = 9600 MPs/L), but still environmentally relevant concentration of MPs on L. minor. Subsequently bioadhesion of MPs was studied and the number and strength of MPs adhering to plant biomass were assessed. MPs did not adversely affect various parameters of plants (e.g., specific growth rate, chlorophyll contents, total antioxidant capacity, electron transport system activity, and contents of energy-rich molecules) throughout the duration of the experiment (12 weeks), except for the first week of the experiment, when protein content and total antioxidant capacity were affected. On the other hand, MPs affected the root length of L. minor during the first eight weeks of the experiment, while further exposure resulted in a decrease in the effects, indicating the ability of L. minor to tolerate the presence of MPs for a long period of time. MPs adhered rapidly to the plant biomass and the average percentages of strongly and weakly adhered particles were 6.5% and 20.0%, respectively, of the total MPs applied. In summary, results of this study suggest that L. minor can tolerate hotspot concentrations of MPs and can collect MPs from the water surface. Therefore, phytoremediation using floating plants could be considered as a potential method for in situ removal of MPs from the aquatic environment.

Nanosized titanium dioxide elevates toxicity of cationic metals species for Daphnia - have aging and natural organic matter an unexpected impact?

In aquatic ecosystems, nanosized titanium dioxide particles (nTiO2) likely interact with natural organic matter (NOM) and may alter the ecotoxicity of co-occurring metals. The magnitude of changes in toxicity may be modulated by the duration of interactions (i.e. aging) between these factors. As those interactions are hardly addressed in literature, the present study aimed at assessing the impact of aging durations (0, 1, 3 and 6 days) on metals with mainly cationic (silver (Ag), cadmium (Cd)) or anionic (arsenic (As)) toxic ions in combination with three nTiO2 levels (0.0, 0.6 and 3.0 mg/L) and two NOM levels (0 versus 8 mg TOC/L). The interaction of these factors was additionally investigated for two aging scenarios: in one scenario nTiO2 were aged together with one of the metals, while in other scenario metals were added to aged nTiO2. Subsequently, their combined acute effects on Daphnia magna were assessed. The results uncovered that nTiO2 elevate the toxicity of metals with mainly cationic species (i.e. Ag+ and Cd2+) with the effect size depending on their valence electron. Contrary, nTiO2 have no impact on the metal with mainly anionic species (i.e. HAsO42-). Furthermore, NOM reduced metal toxicity only for Ag and aging duration had a limited impact on the test outcome suggesting that relevant interactions between metal and nTiO2 occur rather quick (below 24 h). These findings suggest that the charge of metals' most toxic species is the determining factor for its interaction with nanoparticles and the resulting ecotoxicological effect assessment.

Seeking for a perfect (non-spherical) microplastic particle - The most comprehensive review on microplastic laboratory research.

In recent decades, much attention has been paid to microplastic pollution, and research on microplastics has begun to grow exponentially. However, microplastics research still suffers from the lack of standardized protocols and methods for investigation of microplastics under laboratory conditions. Therefore, in this review, we summarize and critically discuss the results of 715 laboratory studies published on microplastics in the last five years to provide recommendations for future laboratory research. Analysis of the data revealed that the majority of microplastic particles used in laboratory studies are manufactured spheres of polystyrene ranging in size from 1 to 50 µm, that half of the studies did not characterize the particles used, and that a minority of studies used aged particles, investigated leaching of chemicals from microplastics, or used natural particles as a control. There is a large discrepancy between microplastics used in laboratory research and those found in the environment, and many laboratory studies suffer from a lack of environmental relevance and provide incomplete information on the microplastics used. We have summarized and discussed these issues and provided recommendations for future laboratory research on microplastics focusing on (i) microplastic selection, (ii) microplastic characterization, and (iii) test design of laboratory research on microplastics.

Aquatic Biofilms-Sink or Source of Microplastics? A Critical Reflection on Current Knowledge.

The scientific understanding regarding sources, occurrence, and effects of microplastics in the aquatic environment has advanced rapidly, leaving some meaningful knowledge gaps virtually untouched. One of them is the interactions of microplastics and biofilms, microbial communities ubiquitous in aquatic ecosystems and fundamental for a range of ecosystem-level processes. It is evident that biofilms can quickly develop on the microplastic surface and consequently change particle properties and, as such, its fate and ecotoxicity. Moreover, microplastics interact with ubiquitous biofilms that are developed on any surfaces in aquatic ecosystems. Although the knowledge about these interactions is at best limited, it is expected that microplastics attach to the water-biofilm interface or penetrate the biofilm matrix. Microplastics can accumulate and ab- or adsorb to those biofilms where they are subjected to transformation processes such as fragmentation. Thus, biofilms may function as a sink. Changes in environmental conditions may, however, stress biofilms initiating their dieback and microplastic release, which could turn biofilms into a source of microplastics. We argue that the accumulation and release dynamics are a largely overlooked but potentially important piece to the puzzle that is a comprehensive understanding of microplastic fate in the environment and thus under the influence of multiple interacting factors. Environ Toxicol Chem 2022;41:838-843. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The first comprehensive study evaluating the ecotoxicity and biodegradability of water-soluble polymers used in personal care products and cosmetics.

Water-soluble polymers (WSPs) are organic materials that have been used for decades in various applications as part of paints, coatings, adhesives, washing agents, pharmaceuticals, personal care products and cosmetics. However, their ecotoxicity, biodegradability, and overall impact on the environment are still unknown. In this study four polyacrylic acid- based WSPs (three in the solid state and one in the liquid state), which are widely used in cosmetic industry, were tested in terms of their ecotoxicity and biodegradability. The ecotoxicity tests were performed using aquatic plant Lemna minor, microalga Pseudokirchneriella subcapitata, crustacean Daphnia magna, bacterium Allivibrio fischeri, and a mixed bacterial culture of activated sludge (with heterotrophic and nitrifying microorganisms tested separately). All four WSPs had low or moderate effects on the tested organisms at several endpoints. However, the liquid WSP had a specific toxic effect on the bioluminescence of Allivibrio fischeri and the oxygen consumption of nitrifying microorganisms - 100 mg/L caused 73% and 88% inhibition, respectively. Therefore, some WSPs capable of inhibiting nitrifying microorganisms could have implications for the nitrification process in wastewater treatment plants and aquatic ecosystems, despite 100 mg/L being a high tested concentration and probably difficult to reach in wastewater. All investigated WSPs were not biodegradable; therefore, their persistence in the environment could be expected.

An extensive characterization of various environmentally relevant microplastics - Material properties, leaching and ecotoxicity testing.

Microplastics in the environment occur in different sizes and shapes and are made of various polymers. Therefore, they also considerably differ in their properties and ecotoxicity. However, the majority of microplastics research uses pre-made spherical microplastics, which practically do not exist in the environment. Our work focused on a comprehensive study of six different types of microplastic that were prepared to simulate common microplastics found in the environment. All types of microplastics where chemically and physically characterized using Fourier-transform infrared spectroscopy, thermal analysis, field-emission scanning electron microscopy, optical microscopy and laser diffraction analysis. The specific surface area was determined using the BET method. Furthermore, effects of microplastics and microplastic leachates on a common duckweed (Lemna minor) were evaluated. All tested microplastics did not affect specific growth rate and chlorophyll a content in duckweed, while microplastics with a rough surface and sharp edges caused a significant reduction of duckweed root length. Microplastics made of Bakelite also showed an intensive leaching, which increased their ecotoxicity potential. Natural particles used as a control did not have any negative effect on duckweed. Overall, microplastic particles have significantly different ecotoxicity profiles depending on their physico-chemical properties. Therefore, the testing of environmentally relevant particles and their proper characterization, as well as the testing of microplastic leaching properties, is crucial for understanding of microplastics ecotoxicological potential.

New Insights into Antibacterial and Antifungal Properties, Cytotoxicity and Aquatic Ecotoxicity of Flame Retardant PA6/DOPO-Derivative Nanocomposite Textile Fibers.

The aim of this study was to evaluate the antibacterial and antifungal activity, cytotoxicity, leaching, and ecotoxicity of novel flame retardant polyamide 6 (PA6) textile fibers developed by our research group. The textile fibers were produced by the incorporation of flame-retardant bridged 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivative (PHED) in the PA6 matrix during the in situ polymerization process at concentrations equal to 10 and 15 wt% (PA6/10PHED and PA6/15PHED, respectively). Whilst the nanodispersed PHED provided highly efficient flame retardancy, its biological activity led to excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, as well as excellent antifungal activity against Aspergillus niger and Candida albicans. The results confirmed leaching of the PHED, but the tested leachates did not cause any measurable toxic effect to the duckweed Lemna minor. The in vitro cytotoxicity of the leached PHED from the PA6/15PHED sample was confirmed for human cells from adipose tissue in direct and prolonged contact. The targeted biological activity of the organophosphinate flame retardant could be beneficial for the development of PA6 textile materials with multifunctional properties and the low ecotoxicity profile, while the PHED's leaching and cytotoxicity limit their application involving the washing processes and direct contact with the skin.

Aquatic vascular plants - A forgotten piece of nature in microplastic research.

Research on the interaction of microplastics and aquatic organisms has been mainly focused on the evaluation of various impacts on animals while aquatic vascular plants have been so far understudied. In this commentary, we summarized knowledge about interactions of microplastics with aquatic vascular plants and highlighted potential ecological implications. Based on recent research, microplastics have minimal impacts on plants. However, they are strongly attracted to plant tissues, adsorbed, and accumulated by plants. Several mechanisms drive microplastics adsorption and accumulation; the most possibly electrostatic forces, leaf morphology, and presence of periphyton belong among the most important ones. Adsorbed microplastics on plant tissues are easily ingested by herbivores. Plants can thus represent a viable pathway for microplastics to enter aquatic food webs. On the other hand, the strong interactions of microplastics with plants could be used for their phytostabilization and final removal from the environment. Aquatic vascular plants have thus an important role in the behavior and fate of microplastics in aquatic ecosystems, and therefore, they should also be included in the future microplastic research.